Universal Standing Seam Specifications

Universal Standing Seam panels have a snap-action seam to ensure a weathertight roof. An integral fastening hem provides for concealed fasteners with slotted holes to allow for the metal’s natural expansion and contraction.

Pre-Formed Flashings and Accessories

  • Hip trim
  • Vented and non-vented ridge trim
  • Self-cleaning valley
  • Combination starter strip/drip edge
  • 3 gable trim options
  • Sidewall flashing
  • Matching coil stock
  • Seams are 1.5” tall
  • Color-matched butyl sealant
  • RoofAquaGuard underlayment
  • Optional snow guards

Standard and Custom Panels are 12” and 16” Wide

  • Available in standard lengths of 6’, 10’ and 12’
  • Custom lengths available

Steel: Universal Standing Seam is produced from top quality USA-made G90 galvanized steel. The metal thickness is .0216” before paint. All accessories and trims are made from matching metal.

Minimum Roof Pitch: 2:12

Finish: Universal Standing Seam is coated with a baked-on, protective primer and Kynar 500® or Hylar 5000® PVDF resin-based coating. Kynar 500® and Hylar 5000® are trade names for polyvinylidene fluoride resin. This high quality, industry-leading finish includes reflective pigment to maximize energy efficiency. The backs of each panel are finished with a protective clear coat.

For more information or architectural specifications, contact us.

Kynar 500® is a registered trademark belonging to Arkema Inc.
Hylar 5000® is a registered trademark belonging to Solvay